Duct Cleaning Broken Down | ALLINONEHOMEREPAIRS.com



All In One Home Repairs 24/7 Logo

 You have probably heard that clean HVAC ducts help ensure healthy indoor air quality. You may be thinking about doing a Do It Yourself (DIY) duct cleaning project. If you’re watching your wallet and have an industrious spirit, you can try duct cleaning yourself.  However, some like to leave it to the professionals!
Ducting Replacements - Orange County Plumbing & HVAC

Good-to-know tips before you begin:

Before you start a do it yourself duct cleaning project, there are a few things you should know.
  1. DIY duct cleaning isn’t easy. If you’re not accustomed to this type of work, it can take longer than you realize to finish the job.
  2. Do it yourself air duct cleaning isn’t for the squeamish. You might uncover mold, animal and insect droppings and all sorts of things. You might even find a dead rodent.
  3. If you take on DIY duct cleaning, you can make your ducts significantly cleaner and reduce dust.
  4. As a DIYer, you probably don’t have access to the high-powered vacuums and rotary brushes that duct cleaning companies use. Without professional equipment, you cannot achieve the same results as a reputable duct cleaning service.

What are the tools of your new trade?

  • Heavy duty gloves, a dust mask and goggles to wear when doing the DIY duct cleaning work.
  • A screwdriver that’s compatible with the screws on your registers and return-air grille plates.
  • Paper towels or rags.
  • A vacuum with a lengthy hose. A “Shop Vac” works best.
  • A stiff-bristle brush with a long handle. A rotary dryer vent-cleaning brush or toilet brush are good choices.

DIY duct cleaning: a step-by-step guide:

  1. Remove screws from air duct covers and return-air grill plates.
  2. Temporarily cover your supply air registers with paper towels or cloths. Lift the unscrewed register slightly up and tuck a towel under it to keep the towel in place. This will stop dust from entering your rooms as you clean.
  3. Set your thermostat to the “fan on” position. The fan will help move the dust that you loosen when cleaning. Make sure the heat and cool mode is off. If you have an older thermostat that does not have a “fan only” setting, run the heat.
  4. 9 Best Duct & Vent Installers – Phoenix AZ | AFR Dynamics
  5. Loosen the dust in the ducts using the brush. A light tapping with the brush will loosen clumps of dust sticking to the inside of the ducts.
  6. Uncover and lift one supply register at a time. Use the vacuum hose to suck up any dust blown out by the fan. Use the hose to go as deep as you can to suction dust.
  7. Clean the return-air registers one-by-one with your brush and vacuum.
  8. Clean each duct covers and grill plate before reattaching.
  9. Change dirty HVAC air filters. You won’t get the full benefits of clean ducts if you have HVAC filters clogged with the dust and contaminants they are designed to catch.
  10. Piping – NTS MEP Techno Pvt. Ltd.

What if you find mold during your DIY duct cleaning?

If your find moldy insulation, call an HVAC professional to replace it. There is no effective way to clean mold from insulation.

DIY duct cleaning: what are the risks?

DUCT DAMAGE. By doing a DIY duct cleaning, you run the risk of tearing your ducts, especially if you have flex ducts. These are made from thin plastic and are easy to damage. Even if you poke a small hole in your ductwork, you’ll reduce airflow in your home. That makes your HVAC system less effective and drives up your utility bills.
You also need to be careful not to crush flex ducts or knock the plastic tubes off any support brackets.
LESS EFFECTIVE CLEANING: While you can improve your air quality with a DIY duct cleaning, your efforts won’t be as effective as a professional cleaning. You won’t be able to reach every nook and cranny that professionals’ can with high-powered vacuums and 150-feet of hose.
If you think DIY duct cleaning isn’t for you, there are many reputable NADCA-certified cleaning companies available. The National Air Duct Cleaners Association sets professional duct cleaning standards and requires continuing education for those certified.
It won’t hurt to get a few estimates from NADCA-certified companies like allinonehomerepairs247.com before putting on heavy duty gloves and a dust mask and beginning a DIY duct cleaning project. Whichever route you take, you’ll likely improve air quality, which is especially important for asthma and allergy-sufferers.

All In One Home Repairs 24/7 Logo

Comments

Post a Comment

Popular posts from this blog

New Home Owner & Electrical Work | ALL IN ONE HOME REPAIRS 24/7

Image
Becoming a homeowner has many benefits. Unfortunately, a disadvantage is that sometimes things breakdown or just break. Sometimes you have no idea why something isn’t working. Diagnosing the problem is only half the battle.   When it comes to electrical issues, most homeowners have little idea what the exact problem is much less how to fix it. If you have ever had any problems or issues working correctly, than this post will give insight on if you need to upgradeyour electrical panel , how to determine if your panel’s capacity and why hiringan electrician is the best way to go if you are thinking about how you can change your electrical panel yourself. What Is a Breaker Panel? Before we get into how and why your electrical panel might not be working, let’s talk about the breaker panel itself. An electrical panel is the central point that connects the wires from outside to the wires inside your home and how your electric service provider provides electricity to your hom
Read more

10 Easy Steps to Keep Your Air-Conditioning Unit Running Smoothly | ALLINONEHOMEREPAIRS247.com

Image
10 Easy Steps to Keep Your Air-Conditioning Unit Running Smoothly Shut Off The Power Due to the dangers of working around electricity and the air-conditioner’s moving parts, it’s essential to completely turn off power to the unit. On the exterior condenser/compressor, look for an exterior shut-off box near the unit. Indoors, also turn the power off at the breaker box. Remove Debris On the exterior condenser/compressor, remove the fan cage. Using a screwdriver or wrench, remove the fasteners and lift the cage or fan grill away from the top of the unit. By hand, or with a wet/dry vacuum, clean leaves and other debris from the interior.  Clean The Fins Remove the outer covers and use the brush attachment on a powerful shop vacuum to remove all outside dirt. Then, using a gentle stream from a garden hose, spray through the fins from the inside out to remove any built up dirt or debris from between them. Never use a pressure washer, since the pressure can damage the
Read more

Air Conditioning Efficiency | ALLINONEHOMEREPAIRS247.com

Image
Is Running Central Air Cheaper Than Running Three Wall Air Conditioners? Air conditioning makes the hottest summer days more enjoyable, but rising energy costs and the growing awareness of energy conservation and resource depletion demands you cool your home as cheaply and energy efficiently as possible. Deciding which cooling method will save you the most - three window air conditioners or a central air unit - depends on a few factors. Cooling your home with the proper system saves you money and electricity, and keeps you completely comfortable no matter the temperature outside. Central air units are designed to work with your heating vents to supply cool air to every room in your house. Granted, you can turn off the registers to limit or stop the air from entering a room, but the central air unit will still be running at full power. One of the ways to use a window unit, in this instance, is to spot cool a room that is occupied, but they can also save energy, be used fo
Read more